6W Phihong IP67 Constant Current AC Drivers

Description

The Phihong PDA006A LED driver is capable of powering up to 6 Watts of LEDs! With output currents of 350, 700 and 1000mA you can select just the right drive current for your setup. This driver can be used in indoor and outdoor applications. This driver is waterproof which should make you comfortable enough to use outdoors, even in wet areas! Input connections are 22 AWG wire while output connections are 18 AWG wire.

Added Protection

• Input Over-Current Protection: The input power line will be fused with a 1W/10 Ohm fuse resistor
• Short Circuit Protection: Automatically restarts without damage
• Output Over-Voltage Protection: Output should not exceed voltage limits, driver will automatically shut down if it does

Technical Documentation

Output Specifications

CHARACTERISTICS

Characteristics

Unit

Typical

Leakage Current

mA

<0.5ma at="" 120vac="" and="" maximum="" load="" div="">

Maximum Input Current

mA

<100ma at="" full="" load="" 90vac="" div="">

Weight

grams

40

Efficiency

%

70% minimum at nominal input voltage, full load

Turn-on/Turn off delay time

Seconds

0.5ms maximum

Operating Temperature

°C

-20 to +50

Storage  Temperature

°C

-20 to +70

Dimensions

mm/inch

(L) 58mm (2.28in) X (W) 35mm (1.38in) X (H) 20.5mm (0.81in)

Warranty

Yrs

3

Full Documentation

PDA006A Documentation