Cree XLamp XP-E2 Color High Power LED Star

Description

Need Some Color?

Colors

LED Star MCPCB

We offer the color XP-E2 in two metal core printed circuit board (MCPCB) versions: a single (1-Up) and triple (3-Up). The 1-Up is a single XP-E2 LED reflow soldered to a 20mm hexagonal (LED Star) MCPCB. The MCPCB has four large solder pads for easy solder connections. The 3-Up is three (3) XP-E2 LEDs reflow soldered in-series to a 20mm hexagonal MCPCB. The 3-Up MCPCB has two solder pads for connections, mounting holes for secondary Carclo optics and a center hole for wires or securing the LED star to a heat sink.

Secondary Optics

Both versions (1-Up & 3-Up) of the color XP-E2 are designed to work with secondary optics from Carclo; Carclo is a leader in molded poly-carbonate lens systems. The 1-Up secondary lens system combines a plastic holder and lens that sits on top of the 1-Up MCPCB, while the 3-Up optic is a one-piece system with three legs that sit down into corresponding holes on the 3-Up MCPCB. These secondary optics focus light into narrow, medium, wide and elliptical patterns. More information is available on optics that mate with the XP-E2 LED on this page under the 'Accessories' section below.

Images, Part Numbers & Notes

Selecting the LED options near the 'add to cart' button displays the corresponding product image and part number. For referencing detailed specifications there are tables and downloadable documentation below.  Important Note: Unless noted otherwise the specifications listed are for a single XP-E2 LED. This means that in most cases the values need to be tripled for applications with the 3-Up version. For Example, if the forward voltage listed is 3.15V @ 350mA, then the 3-Up version would be 9.45V.

Technical Documenataion

FLUX CHARACTERISTICS COLOR (T_J= 25° C)

CHARACTERISTICS

Full Documentation

Cree XP-E2 Documentation

Indus Star Documentation