72W Phihong 3000mA Constant Current AC Driver

Description

The Phihong PDA072B-3A0G is one powerful constant current LED driver. The 72 Watt driver puts out 3000mA to your LEDs. This makes it so it can drive Cree XP-L and XM-L2 at their max output potential. The driver is great for all types of lighting as it has low enough voltage requirements to work with smaller setups but also drives your LEDs very bright so it can be useful in street and flood lighting as well! Connections are all made via AWG18 wire and there are two mounting holes on either side of the unit for mounting with screws.

Added Protection

• Input Over Current Protection: the input power line is fused with a 2A fuse
• The PSU will withstand a short circuit across the outputs without any damage
• Open Circuit protection: Once circuit is opened, the output voltage should be less than 120% at nominal AC input

Technical Documentation

Output Specifications

CHARACTERISTICS

Characteristics

Unit

Typical

Leakage Current

mA

<0.5ma at="" 230vac="" and="" maximum="" load="" div="">

Maximum Input Current

mA

<2a at="" full="" load="" 100vac="" div="">

Weight

grams

750

Efficiency

%

84% minimum at nominal input voltage, full load

Turn-on/Turn off delay time

Seconds

0.5s maximum

Operating Temperature

°C

-40 to +60

Storage  Temperature

°C

-40 to +85

Dimensions

mm/inch

(L) 242mm (9.5in) X (W) 43.5mm (1.7in) X (H) 30.5mm (1.2in)

Warranty

Yrs

5

Full Documentation

PDA072 Documentation