25W Phihong 0-10V Dimming IP67 AC Drivers

Description

The Phihong PDA025W is a constant current LED driver capable of up to 25W. There are plenty of drive currents to choose from, and even better, it works with 0-10V dimming so if you have too much light, you can dim it easily with a 0-10V dimmer. The low profile design makes it easy to work into your setup whether it be indoor or architectural lighting. All connections are made via stranded wire and there are mounting spots for screws on either end of the driver.

Added Protection

• Input Over Current Protection: The input power line will be fused with a 1.6A fuse
• Short Circuit Protection: This LED driver will withstand a short circuit across the outputs without internal damage
• Output Over Voltage Protection: The output shall be protected (latched) from over voltage
• Open Circuit Protection: This driver will withstand an open circuit across the outputs without damage

Technical Documentation

Output Specifications

CHARACTERISTICS

Characteristics

Unit

Typical

Leakage Current

mA

<0.5ma at="" 277vac="" and="" maximum="" load="" div="">

Maximum Input Current

mA

<400ma rms="" at="" full="" load="" 277vac="" div="">

Weight

grams

220

Efficiency

%

81-84% minimum at nominal input voltage, full load

Turn-on/Turn off delay time

Seconds

1s maximum

Operating Temperature

°C

-40 to +90

Storage  Temperature

°C

-40 to +85

Dimensions

mm/inch

(L) 80mm (3.15in) X (W) 78mm (3.07in) X (H) 25.4mm (1.00in)

Warranty

Yrs

3

Full Documentation

PDA025W Documentation