25W Phihong IP67 Constant Current AC Drivers

Description

The Phihong PDA025B LED driver packs a lot of power in a low profile, simple design. This driver can power up to 25 Watts and has plenty of constant current outputs to choose from, make sure to pick a current that is safe for the LEDs you have. With high currents this off-line driver can drive LEDs like the Cree XP-L and XM-L2 at closer to their max potential, getting you all the Lumens you need! Output and input connections are made through 18 gauge stranded wire and there are mounting holes on either side for mounting with screws.

Added Protection

• Input Over Current Protection: The input power line will be fused with a 1.6A fuse
• Short Circuit Protection: This LED driver will withstand a short circuit across the outputs without internal damage
• Output Over Voltage Protection: The output shall be protected (latched) from over voltage
• Open Circuit Protection: This driver will withstand an open circuit across the outputs without damage

Technical Documentation

Output Specifications

CHARACTERISTICS

Characteristics

Unit

Typical

Leakage Current

mA

<0.5ma at="" 277vac="" and="" maximum="" load="" div="">

Maximum Input Current

mA

<400ma rms="" at="" full="" load="" 277vac="" div="">

Weight

grams

220

Efficiency

%

81-84% minimum at nominal input voltage, full load

Turn-on/Turn off delay time

Seconds

1s maximum

Operating Temperature

°C

-40 to +90

Storage  Temperature

°C

-40 to +85

Dimensions

mm/inch

(L) 80mm (3.15in) X (W) 78mm (3.07in) X (H) 25.4mm (1.00in)

Warranty

Yrs

3

Full Documentation

PDA025B Documentation