10W Phihong 700mA Constant Current AC Driver

Description

The Phihong PDA010B-700C is a low-profile 10 Watt LED driver for indoor lighting applications. This constant current driver has an output voltage range of 7.5-12VDC and will keep your LEDs running at a steady 700mA. Input and output connections can be made via the terminal blocks on either side and there are mounting holes on either side so you can easily mount this driver wherever you need with a couple screws.

Added Protection

• Input Over Current Protection: The input power line will be fused with a 1.6A fuse
• Short Circuit Protection: This LED driver will withstand a short circuit across the outputs without internal damage!
• Output Over Voltage Protection: The output shall be protected (latched) from over voltage
• Open Circuit Protection: Once the circuit is opened, the output voltage should be less than 14.4V at nominal AC input

Technical Documentation

Output Specifications

CHARACTERISTICS

Characteristics

Unit

Typical

Leakage Current

mA

<0.5ma at="" 110vac="" and="" maximum="" load="" div="">

Maximum Input Current

mA

<160ma at="" full="" load="" 100vac="" div="">

Weight

grams

85

Efficiency

%

70% minimum at nominal input voltage, full load

Turn-on/Turn off delay time

Seconds

0.5ms maximum

Operating Temperature

°C

-20 to +50

Storage  Temperature

°C

-20 to +85

Dimensions

mm/inch

(L) 106mm (4.17in) X (W) 40mm (1.57in) X (H) 21mm (0.83in)

Warranty

Yrs

3

Full Documentation

PDA010B-700C Documentation